服務熱線
400-660-8810
歡迎訪問深圳市嘉士達精密儀器有限公司網站
全國統一服務熱線：
18476488562
JT6410A Programmable Electronic Load#技術參數
日期：2024-01-05瀏覽：1124次
JT6410A Programmable Electronic Load
JT641x/JT641xA系列電子負載，在JT63xxA系列高性能電子負載的基礎上，增加了多種快充協議的支持，方便了用戶對快充產品的測試。同時，借助500KHz高速同步采樣及DSP技術，全面加強瞬態測試以及多方位的智能分析，并全面整合到自動測試功能，特別適用于電源及相關行業的量產與來料檢測；而可編程電流上升率、高速動態帶載及可編程序列功能，亦可以滿足大部分的研發需要。
Features：
★ Support USB PD2.0 / PD3.0 / QC 2.0 / QC 3.0 / QC4.0+ / PE+ / PE+ 2.0 / FCP / SCP /
AFC / VOOC protocol。( JT641x no support FCP / SCP / AFC / VOOC)
★ 500KHz synchronous sampling with 10Hz，10uA，0.1mV stable resolution.
★ Support the measurement of ripple voltage/current ripple (Vpp/Ipp), peak
voltage/current (Vp+/Ip+) and valley voltage/current (Vp-/Ip-)
★ Support CC, CV, CP & CR mode
★ Support accurately simulating LED electronic load loading.（JT6410 / JT6410Awithout
this function）。
★ Support CP & CR mode when in CV/CC source and support CV/CC source detecting
and matching when in CR mode.
★ Support up to 50KHz dynamic loading mode and peak voltage (Vp+) and valley voltage
(Vp-) measurement。
★ Support over current protection test (OCP) and maximum power point capture (Pmax)
★ Support load effect measurement.
★ Support high-speed dynamic frequency sweep function.。
★ Support timing measurement。
★ Support over voltage protection test
★ Built-in waveform generator. In list mode, different waveforms can be simulated.
★ Support short-circuit analog function.
★ Support automatic test (A-test) alone.
★ Support battery resistance and battery capacity test.
★ Support remote sensing.
★ Support Von and Voff function.
★ Shortcut supports 20 groups of data storage and read.
★ High-luminance & full view graphic dot matrix screen.
★ Over current, over voltage, over power, over temperature, polarity reversed protection
★ Intelligent fan system. Fan will be automatically initiated according to the temperature.
★ Support external trigger input and output.
★ Standard RS232 interface.
★ Support current waveform output monitoring.
★ Standard SCPI protocol.
Model | JT6410A | ||
Input Rating | Power | 150W | |
Voltage | 0~30V | 0~150V | |
Current | 0~3A | 0~15A | |
Min. operating voltage | 1.4V@15A | ||
CC Mode | Range | 0~3A | 0~15A |
Resolution | 0.05mA | 0.3mA | |
Accuracy | 0.03%+0.05%FS | ||
CV Mode | Range | 0~30V | 0~150V |
Resolution | 0.5mV | 2mV | |
Accuracy | 0.03%+0.03%FS | ||
CP Mode | Range | 150W | |
Resolution | 16Bits | ||
Accuracy | 0.1%+0.1%FS | ||
CR Mode | Range | 0.1Ω~50KΩ | |
Resolution | 16Bits | ||
Accuracy | (0.1+0.01R)% | ||
LED Mode (JT6410(A) None | Bandwidth | 100kHz above | |
Rd Coefficient | 0.001~1 | ||
Dynamic Operation Mode | Range | 10uS~50S | |
Resolution | 2uS | ||
Accuracy | 1uS+20PPM | ||
Slew rate | 0.6A/mS~1.5A/uS | ||
Voltage Meas. | Range | 0~30V | 0~150V |
Resolution | 0.1mV | 1mV | |
Accuracy | 0.02%+0.03%FS | ||
Current Meas. | Range | 0~3A | 0~15A |
Resolution | 0.01mA | 0.1mA | |
Accuracy | 0.03%+0.03%FS | ||
Ripple Meas. | Range | 0~30V | 0~150V |
Bandwidth | 10Hz~100kHz | ||
Resolution | 1mV | 10mV | |
D+/D-Voltage Meas. | Range | 0~3.3V | |
Resolution | 1mV | ||
Accuracy | 10mV | ||
